PROCESS FOR SMD ASSEMBLY:

Method 1:

Incomes:

· Stencil in stainless steel

· CSV File with assembly coordinates and angles.

· Solder paste

· PCB

· Components

With the solder printer paste and the stencil, we put in the PCB the solder paste.

After that the pick and place with the csv file charged proceed to put any smd component in each position in the PCB.

Then the PCBA goes to the reflow oven for complete the solder process.

After that our expert technicians weld the Through hole components.

Then we check the pcba Quality.

We check the function and continuity, and the appearance of the pcb.

After that the PCBA is ready.

Manufacturing process

Method 2

Our Electronic 3D printer can assembly the PCBA

PNP technology: Vacuum Pickup, Computer vision, Automatic Tip Swap

Camera: 5 Mega Pixels, Upward Facing.

Speed: 4 parts per minute

Tray Types: Tape, Individual components

Tape Tray: Number of slots x Tape width: 6x 8 mm, 2 x12mm, 1 x 16 mm Cut tapes

Tray parts loaded: Max 48 per batch

Min. Part Size: 0603 (1608 Metric)

Max Part Size: 0.78" x 0.78" (20 mm x 20 mm).

Supported formats: Centroid File, generated for Cad Tool.

We can put copper rivets in the pcb Substrate for Through hole components